#Epson reset lamp timer install

Choose 'Reset Lamp Timer' and confirm the counter reset.

Press and hold the volume down ('Vol-') button and then the volume up ('Vol+') button for at least 3 seconds.

Choose 'RESET' using the 'ARROW UP' button.

Use the 'ARROW UP'/ 'ARROW DOWN' buttons to choose вЂњLAMP TIMEвЂќ from the 'OPTION' (or 'ADVANCED') menu and then press and hold the 'RESET' button or the вЂњARROW RIGHTвЂќ button.

Use 'ARROW UP'/ 'ARROW DOWN' to choose 'OPTION' from the menu in the left column and press the вЂњARROW RIGHTвЂќ button.

When 'EASY MENU' appears, use the 'ARROW UP'/ 'ARROW DOWN' buttons to choose 'Go To Advanced Menu.

Press the 'MENU' button to call up the menu.

Procedures vary not only among projector manufacturers but also according to projector model. Exceeding the lifespan of the bulb greatly increases the risk of explosions, something that is better to avoid.

#Epson reset lamp timer install

As soon as your new lamp arrives, install it and keep the old lamp as a spare. Even if your old lamp still shines brightly, yet, at the same time, the projector starts to signal that the end of lampвЂ™s life is near, we recommend that you immediately order a new lamp.

Never reset the counter before replacing the lamp. You can find the procedure for resetting the lamp counter in your projector manual or you can proceed according to the following steps. If you do not reset the counter, the projector will report prematurely that the new lamp is worn out or will even refuse to start up.

How do I reset the lamp's operating time counter on the projector?ДЄfter replacing the lamp, it is necessary to reset the lampвЂ™s operating time counterВ on most projectors to zero.